![](http://i86.photobucket.com/albums/k97/effvee/My%201302%20Affair/20150505_052052_zpslq9ogqmt.jpg~original)
Hi everyone, I gathering parts in hopes of building my own fuel injection induction. I want the system to use a LS-1 throttle body since I have one. Given the fact the a IDF throttle are 40, 44, and 48, I feel a single throttle body for a LS-1 should fit the bill. After all it supplied enough air for a V-8
Your thoughts please. I'll post pictures of the throttle body tomorrow
![](http://i86.photobucket.com/albums/k97/effvee/My%201302%20Affair/b7ce0e3297a345e8826e9698848cb125_400x400_zpso6wgsyb4.jpg~original)
![](http://i86.photobucket.com/albums/k97/effvee/My%201302%20Affair/7359-2T_zpsamlteryn.jpeg~original)
![](http://i86.photobucket.com/albums/k97/effvee/My%201302%20Affair/newboss1_edit_1387027697518_zpsdlznyho_edit_1408379430911_zpslyoogqmq.jpg~original)
The Dub shop make some nice IDF mating plates, next CB makes some nice manifolds and lastly the injectors body maybe possible to mod to the CB intakes. I would need to have the mating surface water jet for the throttle body. I'd like to have the setup over the top of the shroud and center; with the air cleaner facing forward.