|
|
#2
February 1st 2007, 19:46
|
||||
|
||||
|
I made mine from schedule 40 T6 aluminum pipe with 1/2" ID, and 1/4" T6 aluminum plate. For ends of the bars, I used 3/4" T6 aluminum solid bar that I drilled, and threaded for the fork ends, then shouldered (turned down) to fit into the pipe, and TIG welded it together.
__________________
Yetibone '71 1302S 1.8 '73 1303S 2.3 '83 928S 4.7 
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Threaded Mode