|
Post the offsets and widths of the wheels and we can help, it should be stamped or cast into them (ET55 is offset of 55mm, 7J is 7" width) with this info we can progress. The problem at the back is that without any spacers on stock drums it hits the bump stops you can grind this down for some extra clearance but not the full amount. Early 944 brakes are a fairly easy/cheap swap and would space out the rear to the right amount while converting to the Porsche stud pattern...
Rich
__________________
http://www.ricola.co.uk
|
November 19th 2007, 11:15
Threaded Mode