|
993 RS calipers on 951 alloy arms
I have '86 951 alloy arms and the narrow hubs. The 993 RS rear rotor fits over this and its centerline is where the stock 951 centerline used to be. The e-brake parts should work just fine once the cables are modified with the Kersher parts. I have 993 RS calipers, which are the same as Turbo calipers except they have smaller piston bores. What difficulties can I expect when I am going to assemble these parts? I think the calipers will not bolt straight up to the mounting tabs/ears on the trailing arms. Weld, re-drill and tap the holes?
Brian
Last edited by verbeekb; January 24th 2003 at 02:45.
|
January 23rd 2003, 16:04
Threaded Mode