Quote:
Originally Posted by Wally
It looks like the drive shafts are not perpendicular to the box. Is the tranny so very short or does it widen the wheel base?
Whats the reason for this?
|
Good eye, most people do not catch that. The reason for the shaft having a slight angle to them is because the ring gear is about 2 inches larger then the standard vw ring gear. The trasaxle is moved forward to keep the mounting point on the bell housing in the same place as a stock vw unit. Hope that clears it up.
FYI: A standard 930 Porsche CV can take up to 22 degrees of angle with out harm. These in the picture have 7 degrees i beleave.
January 25th 2011, 12:16
Threaded Mode