'56 rag with a twist

[fahrvergnugen]

Had a day off today, this meant I was still working only not at the office > sometimes I hate customers.
Between telephone calls I did some work on the oval.

cut the pillar along the line and left the inner plate.



I had to cut out some more rust.


a little test fit, when it all fits I can weld on a piece of flat with the inner plate underneed.


some more test fitting.

And where getting close.


The innerwings are different to the original oval wings, but i have to cut out the most to make room for the 914/911 front suspension..