|
I have my front swap completed as well as the rear. for the front you can use the 944 spindle, strut, spring hat (top spring perch), and beetle springs and strut bearings. i've noticed it lowers the front about 1"-2"
one thing you will have to do is get the flip it bushing kit from topline or bugpack, and get the spindles machined. you will have to drill out the holes that the tie rod ends go through on the spindle to 5/8" then press in the adapter bushings from the top. this mount the tie rod end on the top instead of the bottom. if you try to leave it on the bottom, it will hit the front swaybar. it was $14 to the holes drilled out and $15 for the bushings.
|
April 18th 2003, 22:59
Threaded Mode