|
|
|
|
#1
December 23rd 2003, 04:34
|
|||
|
|||
|
Hmmm...don't know on that one Alf.
But I tell you what, since it has the basic bumper design on it, you could probably make it fit with littel mod/fab. just use bumper brakets or make you own, maybe even mold it to the car some how. Brain-storm on that one for a while and let me know if you get stuck, I'm no expert but might be able to help.  John
__________________
There is no cure for our disease '69 standard ( under the knife) '72 1302 GL ( under the knife and on hold) VolkSport Kfer Gruppe www.VolkSport.net 
|
|
#2
October 5th 2004, 08:27
|
||||
|
||||
|
swings and things
hello people
Ive started racing my 57 oval after lots of work and at 210ks (131mph) my car feels very good due to the fact that i am running a real wing like a porsche and it hold the rear real nice and also pumps the air in to the motor helping cooling and hp. On the front i am running aero guards that were designed my my father witch cause 0 lift but a minimum down force inorder to not push down tomuch, they are lower at the from to keep the air out of the front of the wheels. We are just about finished building a fibreglass GT2 wing for the beetle that looks awsome and does the job of stabilaty and cooling with the ducks either side of the wing. Check this link to see my car with the porsche style wing and front aero guards (at bottom of page, its the blue bug) http://www.aussieveedubbers.com/foru...d=28873&page=3 alex
|
|
#3
October 5th 2004, 10:35
|
||||
|
||||
|
nice looking bug there.
__________________
Vincent W. Strader 64 Type I and 73 1303 going GL top to bottom now if i could just decide wich one. 04 Mitsubishi Lancer plans power 13b Turbo Rotary 300 hp Wheels 18" turbo twists inside Sparco blue racing seats Sparco pedels, wheel, and shifter nob Sparco Rep Andrew @ www.pilotracegear.com Good deals on Sparco stuff 
Last edited by Vincent; October 5th 2004 at 10:40.
|
|
#5
October 5th 2004, 12:09
|
|||
|
|||
|
Al, do you have a website and were are you located?
__________________
T4 2666 1303s
|
|
#6
October 5th 2004, 22:09
|
||||
|
||||
|
Yeh our family business is V-FORCE in sydney Australia
our web site is www.beetleracing.com (clik the right slide for the online parts shop and the left side for the gallary.) more pic and parts are due in the next couple of weeks.
Alex
|
|
#7
March 16th 2005, 04:23
|
|||
|
|||
|
its easy to plug some numbers into a spreadsheet ive got
i need the frontal area of a bug in Metres squared the Cd (aerodynamic drag cooeficient of a bug) mass gear ratios horsepower Centre of gravity height rear wheel radius maximum rpm
|
 |
| Currently Active Users Viewing This Thread: 6 (0 members and 6 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
