|
|
|
|
#1
June 28th 2004, 20:41
|
||||
|
||||
|
I don't think there is anyway to get a 16X7 wheel/tire under the front of a 1302 with stock fenders without a narrow strut spring.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe 
|
|
#2
June 29th 2004, 01:58
|
|||
|
|||
|
How could i find the offset? could i take the wheel to a tire shop and they could tell me? damn, sucks i cant fit em under stock fenders, im joinin the army so car project goin on hold anyways so ill have quite a bit of money to put in to it in about 6 months...... yea pimpin gl rollin around on a army base bumpin my system revvin my turbo flat four ohh yea...sorry just dreamin.
Peace, Wil
|
|
#3
June 29th 2004, 08:05
|
||||
|
||||
|
I didn't say you couldn't get them under stock fenders, I said not with stock springs. You would have to got with the MaxxStruts or something like them. There is a wheel offset calculator sticky thread at the top of the wheel/tire forum.you can use it and do some measuring with a tape and strait edge and see if they will fit. You might have to down size the tires.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe
|
|
#4
June 29th 2004, 09:45
|
|||
|
|||
|
offset
...please....restrain yourself....the word "pimpin" belongs over on the rice board....
 The offset is marked on the inside of the wheel - right next to the size. It'll look something like - 16x7ET23.3 HTH,
__________________
******** Punch 71 Super!
|
|
#5
June 29th 2004, 10:03
|
|||
|
|||
|
K, sorry bout the word choice I'm not a ricer, far from it. So for the tires say maybe a 210 or 205/ 45/ r16, would that work. So if my wheels are 23 for the offset, then I could fit them under stock fenders with new coils? What coils would be the best for say around $300? Once again thanks for the help I'm a new person at all this tire and wheel fiting stuff.
Peace, Wil
|
|
#6
June 29th 2004, 10:12
|
||||
|
||||
|
Quote:
if it is a 23mm offset, they should fit without new springs, but they will probably stick out past the edge of the fender. if it is a 52mm offset, they will need narrow springs/struts and a 10mm spacer to fit and will not stick out past the edge of the fender.
__________________
WinterJam 2010: Vdub, Surf, Skate & Musis Fest WinterJam 2010 'I drive way to fast to worry about cholesterol!' '67 Sunroof Notchback * '68 FI Squareback
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
