Brake line problem.....

[boygenius]

Originally Posted by NO_H2O

You should be able to get Euro flare lines at AutoZone in different lengths. The "T" fitting plan should work.

Sweet. :agree: I hope they have the metric "T" fittings also.

[boygenius]

Got another problem now. I ordered rear rubber lines for my car and when I tried to fit them they are too short. The website says they are supposed to be 235mm long. The lines I took off of my car were 245mm long and the new replacements are 230mm long. I checked and where I could find the part number they are all the same number as the lines that don't fit.

[boygenius]

This look good?

[NO_H2O]

That'll work :agree:

[Mikey 1972GL]

Looks good.

Mike

[boygenius]

Sweet. It's kinda hard to see since everything is so shiny.

Now all I have to do is figure out the rear rubber lines on my car and the chassis is pretty much done. :agree:

[boygenius]

Does the main line to the rear go directly from the M/C to the "T" fitting in the back. I ended up short again on my brake lines. The 911 M/C isn't that different from the type 1 M/C that the main line wouldn't fit. It only makes it to the rear grommet just before the torsion tube in the back. Should I get a connector and another line or should I get another line and re-bend it.???