early 944 brakes, stock MC....dosent feel right

[super vw]

cool, i have a new MC (1303 unit) but i think its aftermarket SO i might be in luck when i got with a 944 MC.

So you have the 944 MC in hand correct?
When you get it all working, tell us how it works!

BTW whats the part number of the 944 MC you have?

Thanks !!

Jonathan

[Jeza]

Jonathan


Not sure what the part number is - there aren't any part number like numbers that I can see on it. But it is the "ate" item.

I'll let you know when its in with the results.

At the moment I'm planning to separate out the front lines (there is 2 front line ports in the 944 mc). I'll use a plug in one side of the front T piece and run one new front line to one side and adjust the old front line to the other side.

The rear is lengthed with a T piece to use the pressure brake light switch and a short line to the new mc port - same as every one else.

Also an update on the plastic remote reservoir fittings. I had a lot of trouble tracking these down. None of the brake shops could help. I eventually found some in an old big BMW (7 series? from 70's?) at pick a part. So if you end up stuck then try the BMW parts department.

Cheers
Jeremy