![]() |
|
|
|
#1
|
||||
|
||||
|
spidy
do anybody know how I set the ingnition sistem on the type4 motor 2,1 ccm
|
|
#2
|
||||
|
||||
|
what kind of ingition system are you running?
|
|
#3
|
||||
|
||||
|
I have the bosch blue-electronic ignition and I don't know the advance times for ignition of my motor.My pistons are flat headed and I have valves for the unleaded fuel. My carburatores are weber double each one for 2 cylinders.
I don't know what size of jets are in my carburator. On the last meeting one friend from Polland say that I must turn the ignition backwards for 7 degrees to make it run normal.Do you have any experiances with electornic ignition systems or can you give me any advice how to set it properly.
Last edited by spidy; March 21st 2005 at 17:02. |
|
#4
|
|||
|
|||
|
It all depends on the distributor. Look for the numbers on the housing? Are the last three numbers 009? If so, set it to 7 btdc. This is where the 009 wants to sit.
__________________
=EuroLook71= 71' Super Beetle 1.6L DP - Kadrons, stock heads P&P by me
|
|
#5
|
||||
|
||||
|
motor problems
I dont now the number of hausing,where a I cant see thet?
when I m seet beek ap my cay and motor is runing my eys cray and my yacket is wery smely.motor is not runing ekvaly.what is the problem |
|
#6
|
||||
|
||||
|
Quote:
![]() When I am sat behind my car, and the motor is running, my eyes cry and my jacket is very smelly? Sounds like far too much fuel? I think the only way you are going to get this sorted is to speak to a VW specialist locally to you and get him to check over the engine, checking mixture, timing etc. Chris
__________________
fastbug.net | FastTrack Dub Club "Straights are the boring bits that link corners together" |
|
#7
|
||||
|
||||
|
thank you whery much
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|