|
|
|
|
#1
February 20th 2006, 23:11
|
||||
|
||||
|
I've used Scat 1.4 kit. Autocraft makes a good set. Of course there's always Bugpack. Cb Performance has a set, and Pauter Machine has billet rollers in different ratios
 . You might want to change Valve springs, and check your pushrods to. All this can be done with motor in the car.
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG 
|
|
#2
February 21st 2006, 12:39
|
|||
|
|||
|
I'll probably replace the push rods with chrome moly guys and upgrade to HD springs at the same time. Of the suppliers that you mentioned which is going to be the best for the cost/quality ?
|
|
#3
February 21st 2006, 23:31
|
||||
|
||||
|
I think Autocraft is the cheapest and have been around a while, about $150 for a set. EMPI has a set about the same price, but I've never heard anything good about them so I didn't say anything about them in my last post. Scat is about the middle of the price range $229 a set. Pauter is over $500 I think. Ask around, some other opinions will help.
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
