|
Hi
My welder has the same series of buttons, from the welders manual I worked out these settings. Make sure sure your shroud is in good condition, it can hamper the gas flow making for crap welds as if you wernt using gas at all. I also soak my wire in WD40, its a penetrating oil for rusted bolts, this stops the wire from rusting in the machine, rust will ruin the liner in the hose going to the gun. I also have a clothes peg hanging on the wire that grips cotton rag and wipes the wire before it goes into the wire feed drums.
Steve
__________________
STI powered 1303 in the works.
Last edited by Steve C; May 16th 2006 at 19:20.
Reason: I pasted the text for the settings and it lost its formating, the picture should make more sense.
|
May 16th 2006, 19:16
Threaded Mode