|
|
#2
August 14th 2002, 11:00
|
|||
|
|||
|
Need to know the offset of the wheels to answer this.
If it's a 50 to 60mm (look for ET) negative offset then yes. You can lay a straight edge across the back of the wheel and measure the distance to the mounting surface, it needs to be at least 6" this is know as backspacing. 
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode