71 bus spindles - turbo hub - boxster front caliper -996 front disc

[pantswagen]

see a 09078 is 19.050 = 3/4 to 49.6

-you would have though they would have just make the farking bearing 50.005

-smokers of losenge shaped purple vein

similarily, with the stock type 2 bearing
31.750 -its 59.4

-you would have thought they would just have make the thing 60mm

1. 1/4 inch to 60mm

-when enquiring do you make such a bearing, you are greeted with
'are you from outer space'

farging farg

-end of moan, thats without asking, can you incorporate a 4mm spacer into each cup



-moan over

-so to fit a 951 hub onto a type 2 spindle -64 - 79, you need 3/4 to 50 19.050 too 50

inner is 31.750 = 1.1/4 to 60mm

-you need 4mm spacers under each cup

-some one do it!