|
|
|
|
#1
April 26th 2007, 21:39
|
||||
|
||||
|
Silicone, or soapy water, is your friend for this, and heavy duty string. Put the seals on the glass. Then, put the string (coated with silicone, or soapy water) in the groove on the seal closest to the inside that goes in window opening. Put some silicone, or soapy water, on the window lip as well. You will need some help to put the glass in. Have someone keep pressure around the edges (don't push in the middle of glass) while you start to slowly pull the string out, from the inside of car. The quarters are fairly easy to do, but it may take a few tries to get it...
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans  1962 SC 1776cc SP 944NA brakes, 993 wheels VKG 
|
|
#2
April 26th 2007, 22:30
|
||||
|
||||
|
also lay the rubber out in the sun for a few minutes... to soften up ... makes stretching it over the window easier
__________________
70 RHD Beetle 67 11 window walk through Super wanted If it ain't steel, it ain't real
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
