![]() |
|
#1
|
||||
|
||||
TMP Drag Day and JJB - June 23rd, 24th
All,
Who is going to these events ? Where are we meeting up and when ? what time does the drag racing start ? I got the leak fixed ... I forgot to tighten up the AN fitting on the top of the oil cooler ![]() The bug rips .... but I'm thinking I need a muffler after the turbo now ![]() Pete ... is your video camera mount universal ? Could it be swapped into another bug easily ? ![]() Sandeep |
#2
|
||||
|
||||
Got a pic of your seats? The mount clamps to the headrest posts.
![]()
__________________
'72 super '65 bus '52 split |
#3
|
||||
|
||||
Gates open at TMP at 10:00 to my understanding. We should all meet up and cruise down. Maybe meet up at the Royal windsor as usual? thoughts?
Alex
__________________
1970 Bug 2110cc. ???Whp, ???Ft/Lbs |
#4
|
||||
|
||||
Thats not going to work ... I don't have head rest posts.
I'm going to have to figure something out ... I was talking to Lanner about an aluminum bar (1" dia) that uses the grab strap mounting locations (remove the straps) and then machine a clamp out of aluminum and use one of these mounts Might have to rig something up for drag day. Sandeep |
#5
|
||||
|
||||
How long to get to TMP ?
I would not mind grabbing a bite before the drive ... McD's / Dennys ? in the area ? Sandeep |
#6
|
||||
|
||||
Gates open at the track at 10am.
If you take the QEW to Highway 20 in Stoney Creek you go past some food joints. I usually stop in Caledonia at the McDonalds and eat before I head to Cayuga. I hope to be at the track at 10, but will be lucky if I am there by 10:30. Will be nice to see some other turbo air-cooleds there. Plan on spending the better part of an hour to get to the track from Mississauga. 45 minutes if you're speeding like a demon. |
#7
|
||||
|
||||
Greg welcome to germanlook,
I'm working Saturday morning and hoping to be heading out at 10-11am from Milton. I'll see ya there.:agree:
__________________
'72 super '65 bus '52 split |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|