Wrong shocks ?

[Steve C]

Hi

You can swap the steel sleeve over if you want. Its not very hard. But if you decide to go with spacer washers make sure that they are the correct thickness otherwise you can crush cup that the shock bolts into.

Steve

[Kafer_Mike]

Originally Posted by Steve C

But if you decide to go with spacer washers make sure that they are the correct thickness otherwise you can crush cup that the shock bolts into.

I used a comparably thick stack of washers and new Grade 6 bolts with nyloc nuts. As Steve mentioned, it should be snug but not deform the shock cup...