|
|
|
|
#1
May 2nd 2009, 08:52
|
||||
|
||||
|
Welcome Dave. Lots of info to be found here.
We just built a "Street" rail. It is lots-A-fun. We stuck with the type 1 transaxle (Rancho Pro Street). It was nice not to have a body in the way when it came time to mount stuff like intercooler, etc. Should make for a fun project.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe 
|
|
#2
May 11th 2009, 08:39
|
|||
|
|||
|
I got the spring plates mounted and it looks like I have 21 1/8 between the insides of the flanges. I assume the vanagon 21 1/2 axles will fit.
Just for anybody that is doing this getting the rubber bushings off the old spring plates is a Pain in the A. Take a torch and heat the inside of the housing. Until you can pop the rubber off. Then burn the rest of the old rubber. my driveway smelled like the start line of Pinks all out. Dave
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
