speedometer sender

[Steve C]

Hi

Silly question, is your speedo electronic?

Steve

[wrenchnride247]

Drill a hole in grease cap. Use the VW cap as guide for hole size (a small file can square the corners of hole)

[Humble]

If your spindle is drilled for a an abs sensor you can use the abs sensor by grounding one wire and running the other to the speedo. Did that for the race car and it works perfect.

[graham]

yes speedo is electric steve ,but I think these other members have sorted it thanks for that

[wrenchnride247]

Does your speedo use a electronic conversion module from the stock bug speedo cable? I was going that route, but I have something WAY OVER THE TOP now! (will show in a few months)

[graham]

Hi sorry for the delayed response,I have no module , at he moment I just have the electronic auto meter speedo ,I am planning on using the auto meter sender with that fitted to the front 944 spindle. I am assuming they make a cable to connect the two together .

[graham]

Hi Humble ,just looked at your post again re, the abs sender that sounds like a plan. Sorry for that I have just read that again today, I think I miss read that the other day,thanks for your help guys.