A call for camber plates

[Jadewombat]

Those black French mounts look like they're for a 944, like the camber mount goes opposite what a bug would need to set camber. Anyone have any experience with the Jeffrey's ones (blue)? Considering getting a set of these. Just need to know how much camber I could dial in (maximum)?

[F4P]

Originally Posted by Jadewombat

Those black French mounts look like they're for a 944, like the camber mount goes opposite what a bug would need to set camber. Anyone have any experience with the Jeffrey's ones (blue)? Considering getting a set of these. Just need to know how much camber I could dial in (maximum)?

the other side existing also...



here

[flat]

I've been back-burnering a set for many years, and one thing that should be noted is that the strut tops are not perpendicular in the chassis, so by just slotting between the mounting screws you'll be off axis and adjusting camber and caster dependently, which can be annoying.

i.e. angle defined below is not 90 degrees:



Ideally what is needed is a camber and castor adjustment that is independent. One of these days I'll get around to designing/building it

Lanner