|
Considering that you do all the work yourself with little or no "professional" help the results and ghe evolution process of this engine earns the highest respect imho. Keep up the great work Wally! One way to find out if your wiring is too small would be to measure the amperage at the pump during a dyno run.If the amps are low (due to the wire being too small) the pump would run too slow.The specs of the pump i.e. on the box or papers should show how many amps the pump pulls.You should have that as a minimum value.
|
April 11th 2011, 01:11
Threaded Mode