|
|
|
|
#1
February 14th 2012, 00:42
|
||||
|
||||
|
The linkage on the side of the case is a bell-crank system for the 911 Accelerator. It's removed (or cut off) when installed in a Type1 chassis.
Having done this all the hard way (http://www.germanlook.net/forums/showthread.php?t=11341) I would highly recommend talking to Alex from Bug@5speed, and ordering their conversion parts. It will solve you hours and hours of headaches, where I would often get to the end and think "well @#^&. They're stuff is way better then what I just built." Alex wrote a "how to" thread which can be found here: http://www.germanlook.net/forums/sho...ht=901+install. For the speedometer output, you either swap your nosecone to one of his (solves multiple problems) or figure out how to cut up the stock output and reseal it as I did. -Dave
__________________
'71 Type 1 - Rally Project '58 Type 1 - I bought an early!?! '73 Type 1 - Proper Germanlook project '68 Type 1 - Interm German 'look' project '75 Type 1 - Family Heirloom '93 Chevy 3500 pickup - Cummins Swap 
|
|
#2
February 14th 2012, 10:40
|
||||
|
||||
|
Thanks! I'd love to buy the bug@5speed stuff, but unfortunately like you, its out of my budget. So I suppose I'll puzzle my way through it.
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
