Exess toe out with 944 alloy arms

[Turbonutta]

small world MR BIG didnt you buy the rear brakes of me when i was in wycombe...

Any way back to the thread i received all my 944 early subframe today so im going to start the swap of my 944 metal arms...i didnt realise that i now need some longer drive shafts

Have all you guys who have done this added a shim/shims or large washers behind the springplate in front of the knobbly bush in the chassis to allow the 944 plate hardware to clear.

Also in the four early arms i have they are all missing the lower shock mount/bolt is this normal..

Mr Mansi still has no stock off the irs adjusta bolts i will ask my mate with a machine shop if he can knock me some up out of stainles stock any body else need some..!?