#16
|
|||
|
|||
After this major upgrade, I ll tryinf to collect parts for the mecanical upgrade..
EJ25 and Porsche 915 gearbox the oil sump from Martin Bott Porsche gearbox plate throttle body reverser from RJES throttle cable fuel filter Bosch fuel pump speed sensor from RJES Cosworth oil control baffle the engine from a Legacy ( EJ25) http://www.youtube.com/watch?v=2xl7MBe9RPw Porsche 915/12 gearbox and shifter plate from DS Tuning wiring harness VDO gauges sensor header tank water gauge oil gauge Vw rabbit GTI rads master cylinder for the hydraulic handbrake line lock Mocal plates |
#17
|
|||
|
|||
hydro handbrake
MC fit LINE LOC Sub parts Porsche parts ring of towing before painting Porsche flywheel ring gear Porsche clutch and Sub belt the new plate detailling Last edited by rennsport; May 19th 2012 at 09:18. |
#18
|
|||
|
|||
#19
|
|||
|
|||
#20
|
||||
|
||||
Very cool project. Keep the pix coming.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe |
#21
|
|||
|
|||
JULY 2011
engine out Welded supports fitting the gearbox engine in place I fit the seats and connect the driver one engine and gearbox replace H4 bulb by HID bi xenon rads in place dashboard mod problems on the exhaust... fuel tank mods T3 parts small panneling for the ecu and the sub wiring harness water gauge sensor the exhaust after cutting and correct rewelding in place too low , so cutting and welding another in place good :mrgreen: panneling the gauges in place |
#22
|
|||
|
|||
1st test http://youtu.be/NaedQNkpuLw before changing exhaust http://www.youtube.com/watch?v=t9swDy8eIVA detailling nouvelle grille de boite sur le cendrier dangerous mushroom ! |
#23
|
||||
|
||||
Super nice. Love the details. You did some very fine work and it has turned out great.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe |
#24
|
|||
|
|||
THANKS
now I fit a RJES exhaust but I loose perf , it looks better but I think I need to make another one like it with bigger tubes http://www.youtube.com/watch?v=r8kwU...layer_embedded |
#25
|
||||
|
||||
Nice to see the full history of the bus on here, I keep an eye on GL.org for an extra dose of GL
Rich
__________________
http://www.ricola.co.uk |
#26
|
|||
|
|||
Hi Rich
give us news too |
#27
|
||||
|
||||
Beautiful lowlight. I was contemplating subie power for my bus...... but the type IV won out.
|
#28
|
||||
|
||||
I would but very little progress lately due to a string of useless trimmers! I have to find number 3 now...
__________________
http://www.ricola.co.uk |
#29
|
|||
|
|||
Beautiful bus and it sounds great too. I would like to know more about your wheel spacers. I have been thinking of running 5x112 Subaru wheels as well. Do you have any advice or feel that the spacers are not safe?
|
#30
|
|||
|
|||
the subaru wheels are not in 5 x112 , I have 10mm adapter on the front and 15mm on the rear, no probleme for the moment...
I ll more safe if I have porsche wheels !!!, but BBS LM in 17" have 10mm offset not good for my bus, and I didn t want to fit 18" wheel, perhaps a set of RH turbo twist in 17 ... |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|