Blizzard's rolling rebuild of a 1303 1975

[Blizzard]

It sounds better in real life than on video. For some reason my camera mic. does not pick up the exhaust and induction noise but you can hear the ticking from the valve train very clear on video.

For the first start and cam brake in it ran very rich 11 12 on the AEM AFR gauge

I started with 55 Idle jets. And 1,5 turns on the Idle mixture screws. For the cam break in I only synchronised the carbs and let it run at 2000 rpm. for 20 minutes. Next time I will start testing different jets and tune the carburators. They ran surprisingly well straight out of the box.