|
|
|
|
#1
July 28th 2006, 16:01
|
|||
|
|||
|
ya correct
-the steel arm hubs dont work
-good new is that the 86 alloy arm is the same as the 87 alloy arm -the hubs are different -late is wider early is narrower -but does look like the steel armed ones -the splines are different -anyway -the hub shaft is the same 85/6 alloy arm -and 87 - alloy arm -i just done fit the early hub to some late arms, -cos i didn't need the bump stop face !!! 
|
|
#2
July 28th 2006, 16:22
|
|||
|
|||
|
here
late87 non abs 944 turbo arm
same width as 85 alloy turbo -with bump stop circle -fitted with the 85 hub and the 87 stub axle -fine splines - not bug splines- ylock axle shaft nut -no pin 
|
|
#3
July 28th 2006, 16:30
|
|||
|
|||
|
and so
the 'majic'
comes from the 1985 only fine splined hub, which looks like the steel armed hub -but isn't -also the 1985 rear disc - if you check the listings, is a one year only affair, although the same diameter, the actual disc thickness is greater
|
|
#4
July 28th 2006, 18:15
|
|||
|
|||
so
spring plate to wheel face is 220mm
=8 and 3/4 inches - easy get a 225 in then, maybe something bigger on a 53 et 10j?? 255??? -doubt it would fit
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
