#301
|
||||
|
||||
A better pic of where both ends of the tube that supports the top of the Coilover of where they tie in at would be awesome.
|
#302
|
|||
|
|||
Quote:
The gearbox has a special mount (bellhouse side). from this mount there are tubes going to the top of the main hoop. the torsiontube is narrowd therefore the body mounting point is on the inside of the innerwing (nrmally on the outside). I made the second tube from this body mounting point to the first tube (this makes a triangle). The schok is mounted to the tube that is going from the body mounting point to the first tube. Stil with me?
__________________
If some is good and more is better, then too much should be just about right! |
#303
|
|||
|
|||
Starting to look like a real cage.
Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#304
|
||||
|
||||
Cool! That will deffinately be 'Spa-froncorchamp approved' :-)
|
#305
|
|||
|
|||
Thanks.
I am following the drag race rules (rules received from Rojo Racing) as good as possible.
__________________
If some is good and more is better, then too much should be just about right! |
#306
|
|||
|
|||
Another pipe added.
Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#307
|
|||
|
|||
new pipe update.
Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#308
|
|||
|
|||
Everything looks very good!
|
#309
|
|||
|
|||
Started on the cage part in the sparewheel area. First I made it with plastic pipes.
Then copied it from steel. Attached to the cage inside. One down, one to go. Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#310
|
||||
|
||||
Nice! I am getting close to the cage stage of my build so you help inspire me.
__________________
Meyers Manx Signature #85 , 79 Convert |
#311
|
|||
|
|||
Thanks,
__________________
If some is good and more is better, then too much should be just about right! |
#312
|
|||
|
|||
Bended the 2nd pipe. just a little fitting and it is ready. one pipe to go before the welding can start.
Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#313
|
||||
|
||||
Can you get the fuel tank out OK, looks close! The bends look good, what sort of bender are you using?
Rich
__________________
http://www.ricola.co.uk |
#314
|
|||
|
|||
Quote:
Not sure about the tank yet. First I have to shorten the right tube a bit and tack-weld them. The bender is just a simple hand (hydraulic) pump. Paul.
__________________
If some is good and more is better, then too much should be just about right! |
#315
|
||||
|
||||
Impressive work!
__________________
Greetings! ________Gerrelt ________homepage:gerrelt.nl __________________________________ |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|