#31
|
||||
|
||||
Can't wait to see it Dave, good job. :righton:
__________________
'72 super '65 bus '52 split |
#32
|
||||
|
||||
where did you get those naca scoops?
__________________
YEAH ITS GOT A HEMI |
#33
|
||||
|
||||
I got the NACA duct stuff from Butlerbuilt. I made a template from the original glass and cut them out of Lexan with a router. Made the stainless screens and secured everything with "T"bolt clamps from Summit.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe |
#34
|
||||
|
||||
The front trunk is a museum piece! Great work!
__________________
My newly Updated Webpage..that actually works now!!! |
#35
|
||||
|
||||
cool thanks i am gonna do that on my car
__________________
YEAH ITS GOT A HEMI |
#36
|
||||
|
||||
Inching forward
I am fighting my way forward on my 2.4L type 4 build. I had to spend more time than normal to fit many parts and spent more time than normal waiting for parts but it is moving forward.
I had a few days off and fitted my DTM. I ended up having to mill near 1/8 inch off the bottom of the alternator stand to get the alternator to sit true and the fan/backing plate to sit properly in the opening. Now I need to get the linkage built. I have one set of center pull linkage but I have had problems with this brand in the past so I am going to try a different center pull rather than use a crossbar set up. Anyway here is what is in it. GA case DPR 82mm crank 96mm KB piston/Bored OE cylinders CB H beam rods Web 119/163 cam w/Jakes lifters Manton push rods Porsche 2L heads worked by Len Hoffman (all the tricks in his bag) Mallory Unilight dizzy w/6LA Hyfire and E-coil 45mm Dellorto DRLA's (for now) Kennedy Flywheel (12 lb.), Press plate and disc Home Built Exhaust (not shown) I built an engine run stand to break it in on.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe |
#37
|
||||
|
||||
you would be in business now if that low life who has your dizzy would get off his a$$ and send it to you. seriously i should be up and around a bit tomorrow i will shoot it by ups. should only be a couple days for the ole brown devil. thanks for letting me borrow it (publicly). look closely in the box for an envelope with some green stuff in it.
__________________
"Givin' people rides in my badass car bro' " - Pete Gaesser |
#38
|
||||
|
||||
]
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe Last edited by NO_H2O; October 21st 2009 at 22:48. |
#39
|
||||
|
||||
Rest up Laz. I know my dizzy is in good hands. You needed to use it after what happened to yours. Glad I could find you another at the swap meet.
I am waiting on a linkage set so sit on a bag of frozen peas, take a pain killer and rest up.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe |
#40
|
||||
|
||||
ive been sitting on these peas for so long now im waiting on them to hatch,who knows what will come out if they do hatch. i got to get up for a while. three days is enough.
__________________
"Givin' people rides in my badass car bro' " - Pete Gaesser |
#41
|
||||
|
||||
Man you are so close now! "Smack Black" is almost back!
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#42
|
||||
|
||||
That exhaust is gonna sound nasty!
Looks great Dave!
__________________
No current VW projects 54 Chevy wagon LS2 AWD 56 Chevy Panel "Lost Cause" VKG Bastage child |
#43
|
||||
|
||||
NO_h20
I am looking at your head cc information and i am seeing 59cc for one head and 56cc for the other is this correct, isn't this going to pose a problem for you when you try to tune it. By the way nice setup this engine should be nice. Saw on jake's site where he did a 2.4ltr also with a 84mm crank and some 5.9inch rods. The engine made 220HP. Are you using 5.5inch rods on your 82mm crank. |
#44
|
||||
|
||||
the final camber volume was 54cc for all 4. The sharpie notes were left on along the way. I should have hit them with some brake part cleaner. My rods are 5.7 with chevy main journals.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe |
#45
|
||||
|
||||
O.k. great, your rod ratio is 1.76 : 1, good. How wide is the engine? I know for a stock type 1 engine the measurement from the crank center to connecting rod pin center is 211mm. I can't remember if the type 4 is 207mm or 209mm.
So is your engine wider than a stock t4 engine. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|