#1
|
||||
|
||||
WANTED: 924S/944S Axle shafts.
WANTED:
A pair of 924S, or 944S (16v DOHC) axles. 21" length, coarse spline pattern. Preferably with CV joints, but not nessasary. Needed for use with 951 rear control arms, and 914-901 transmission.
__________________
Yetibone '71 1302S 1.8 '73 1303S 2.3 '83 928S 4.7 |
#2
|
||||
|
||||
Why don't you want the fine spline axles. It is the same as the VW (33) You could use the type 2 CV's.
__________________
I love my money pit, uhm, err, I mean my car. 1969 beetle in the works... 2.0 type 4 DTM... 2004 Suzuki GSX-R 1000 crashed www.volksport.net Volksport Kfer Gruppe |
#3
|
||||
|
||||
oops, my bad. I thought VW was course, and 951 was fine spline.
Hokay, I need 33 spline, 21" 944 axles. I guess they come from a 924S/944S You got a set?
__________________
Yetibone '71 1302S 1.8 '73 1303S 2.3 '83 928S 4.7 |
#4
|
|||
|
|||
Joe, don't forget I have those 412 cv's if you need them.
__________________
John Helgesen - www.stahlwerks.com 63 356b time capsule 911 track car, getting a cage now 948 project |
#5
|
||||
|
||||
Quote:
Just the ones I'm using. Sorry.
__________________
I love my money pit, uhm, err, I mean my car. 1969 beetle in the works... 2.0 type 4 DTM... 2004 Suzuki GSX-R 1000 crashed www.volksport.net Volksport Kfer Gruppe |
#6
|
||||
|
||||
German Auto Dismantlers (formerly PAP) has boxes of them. they just let me go through it myself and pick them out. if you are going to jake's anytime soon, they are about 10 miles my way from him. they often aren't the cheapest, but they have them. talk to Dave and tell him i sent ya.
__________________
zen '73 2316 TIV GL Standard Bug (quasi) Company Branding, Graphic Design, and Web Services at DigiVinci Design |
#7
|
||||
|
||||
Well,.. if fine splined axles are what I need, I could drive back to dC Auto and get a pair from Rob (I think his name was Rob :shrug: ) He had a pair from the same car, and he's got a painfully complete 944S that arrived Saturday.
Mabye two hours driving, and a hundred bucks on that. Anyway, I'll have to wait 'till after vacation now. I blew my wad on aluminum channels for a tranny mount, and stainless tubing for oil plumbing this afternoon. Thanks for the idea Zen. I'll shoot them a request and see how much they want for a pair. They might be cheaper than dC considering what he wanted for some of his other stuff .
__________________
Yetibone '71 1302S 1.8 '73 1303S 2.3 '83 928S 4.7 |
#8
|
|||
|
|||
Quote:
__________________
John Helgesen - www.stahlwerks.com 63 356b time capsule 911 track car, getting a cage now 948 project |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|