|
|
#11
November 7th 2011, 01:46
|
||||
|
||||
|
...and minutes later.
Might have found the solution in dub_crazee's build thread (http://www.germanlook.net/forums/showthread.php?t=10377). Also made me realize I wasn't thinking about the outer diameter of the bellhousing. Once mine was all bolted up the bolt spacing on the mount tightened slightly, but was still okay. In the example below, there are aluminum spacers between bellhousing and urethane mount, which I think would allow me to keep the spacing 100% correct. Hmph, makes me kinda wish I hadn't ground up those mounts.  -Dave
__________________
'71 Type 1 - Rally Project '58 Type 1 - I bought an early!?! '73 Type 1 - Proper Germanlook project '68 Type 1 - Interm German 'look' project '75 Type 1 - Family Heirloom '93 Chevy 3500 pickup - Cummins Swap 
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Threaded Mode