Finaly worked on my car

[NO_H2O]

The black car finaly got it's turn on the lift. Cup brace is welded in. Bilstiens are ordered for the rear. Adjustable spring plates and JayCee's spring plate covers on the way too. The type 1 2275 is out along with the transaxle.I have acumulated lots of goodies for the car but have had no time to install any of it. I even ordered dual 3 inch NACA duct goodies for both rear quarter windows (like Herbie X). I hope the front spoiler/bumper (Porsche RSR look) is done soon as the RX7 oil cooler is going to the front bumper. The 2275 might have a new home, will know next week for sure.

[Panelfantastic]

Poor step child, doesn't get any love anymore! Always wrenchin' on somebody else's stuff.

[wrenchnride247]

It must feel good to finally work on YOUR ride. (I still have other people in front of mine own stuff) Soon soon you'll be looking like this when your done with upgrades!

[vujade]

very cool Dave. Cant wait to see the bumper/spoiler

[yetibone]

Yep, my car's been lonely in the corner of the garage many times before. Currently, I can't remember a weekend in the last two months that I haven't spent working on it.

About the Bilsteins, I think mine would work better with larger torsion bars. Right now, I'm re-indexing the stock torsion bars back to their original position to get the rear up off the bump-stops. That will take some of the jolt out of bumps to the rear. I'm not sure the stock torsion bars have enough strength to work against the shock's valving when indexed so low.

[super vw]

I cut my bump stops down to about 1"... solved the harsh hit, and there is still plenty of safety margin. Im about 2 inches from touching the stops at rest. Im also using the bilsteins w/26mm torsion bars.

[yetibone]

Yes, my bumpstops are half as long as the stock ones. What it feels like is an incongruency in spring rate, and valving. I hope that going up one spline on the inside will increase the spring rate, as well as the operating range.

[super vw]

re-indexing torsion bars will not raise your spring rate, but it will make your car sit higher at rest. Yes it also makes you have a larger operating range if you raise your car.

[NO_H2O]

Here are a few for you Carbon Fiber junkies.
How about a subwoofer enclosure and new rear seat delete panel made from carbon 1/2 inch fiber/honeycomb sheet goods. Stonger than plywood, lighter than .040 aluminum. Don't ask me if I can get more of this stuff, our aircraft overhauls have been farmed out. But you can get it through Boeing for about $10,000 per 4'x12' sheet.
Bilstiens and new front sway bar are in too.

[iamstumper]

OK, the rear seat delete is just cruel

Have to admit I like the way the back seat area is looking .... What about coming up with a template that folks can use and supply their own materials? Either that or I'm just going to have to break down and send my car to you and see what we can come up with

Looking great and can't wait to see more updates!

[NO_H2O]

I'm sure I can trace it out on poster board for you.

[Lazarus]

Dave i know ive already said it but this really does make me "physically ill."

[Panelfantastic]

Originally Posted by NO_H2O

Don't ask me if I can get more of this stuff, our aircraft overhauls have been farmed out. But you can get it through Boeing for about $10,000 per 4'x12' sheet.
.

Come to think of it, I know a guy. His job is to repair plane parts. Always talking about leftover carbon fiber bits. Never heard him mention any honeycomb though. Says they keep it all frozen? and it's date coded, after a certain date, they throw it out!?
The real kicker is, he's a car guy. Makes stuff for planes all day, but just cant seem to make the jump to building his own stuff. I guess without a plan and a mold he's lost?
I'll ask about honeycomb the next time we chat.


Jeff-

[zen]

that rocks! very cool to see you back on it. i get to see it next week too.

[Panelfantastic]

Hey Dave, still don't think the black car will be done for DD?


Jeff-