Down and out in 2008

[al_kaholik]

These freaks are dragging you lot kicking and screaming into the 21st century!

[Sandeep]

Thanks Guys.

Originally Posted by ricola

Do you have a plan on how you are going to do that left brake master cylinder pushrod? Looks like it will get sandwiched in with the body gasket...

2 heads are better than one Thanks for that, didn't even see the issue. I will fab something up to take care of it.

Originally Posted by al_kaholik

These freaks are dragging you lot kicking and screaming into the 21st century!

Right On !!

Al ... that is a nicely done installation. I'll be using a pico ITX box with an AVR microcontroller intercepting the data feed from the DTA S60 Pro, and then passing on to the ITX box that runs the software to make my touchscreen look pretty. I want to incorporate a GPS feed because of all of the driving I will (eventually) be doing.

The smaller the interface box the better, because the car does not really have an interior (2 seats, steering wheel and shifter )

Sandeep