#1
|
|||
|
|||
Rear suspension explanation needed
I'll be honest, I haven't been researching as much as I want to but I need someone to clear this up for me. I need a clear explanation please. Seriously, talk to me like I'm ten years old and explain the differences, benefits, disadvantages, cost, etc for the different types of upgraded rear suspension; ie uniball, Porsche bits etc.
I have limited internet access here in Germany, and I can't read german so the sources here are almost useless. I would greatly appreciate it. Last edited by libila; July 6th 2006 at 16:40. |
#2
|
|||
|
|||
Anyone? Lots of people are looking but no one can help me out? Please...
|
#3
|
||||
|
||||
The info you are asking for would take pages to answer the way you would like it explained to you. Can you narrow it down to the type of suspension style your most interested in.
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#4
|
||||
|
||||
Some of the Porsche conversion info was covered on the main page under tech. I would start there since it is more popular.
|
#5
|
|||
|
|||
Quote:
Quote:
|
#6
|
|||
|
|||
The suspension tech article on the front page was useful if I were looking to keep the torision rear end, but I'm looking for information on upgrading to a coil spring rear end.
|
#7
|
||||
|
||||
Quote:
You can do a search under this section for coil-overs. There are alot of people on here running this type of set-up. For cost reasons I went with late model 944 set-up. The coil-over set-up is more for racing, or non daily drivers from what i've seen. There is more adjustment with coil-overs though.
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#8
|
|||
|
|||
I've looked through Remmele's site and I'm hoping to find a cheaper solution. I'm ultimatly wanting to find the best solution for supurb handling without spending more money on suspension bits than I did on my Subaru.
|
#9
|
||||
|
||||
Yes Remmele is high priced good's, but good quality. You can check out www.summitracing.com for coil-overs around $350 US. Several advertisers in HotVWs mag carry a uni-ball set-up for about $200 US, but are really made for off roading. If you total this stuff up with shipping from US... Remmele might not be so bad
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|