#316
|
||||
|
||||
Whoa, nice build!
__________________
'72 super '65 bus '52 split |
#317
|
||||
|
||||
Nice updates! Still on the GRX3076R ?
|
#318
|
||||
|
||||
Thanks Petevw
Still the same GTX3076R turbo but with the .63 rear housing, not long now
__________________
STI powered 1303 in the works. |
#319
|
||||
|
||||
There's your limit I think.
|
#320
|
|||
|
|||
Hey Steve, how is your build going?
|
#321
|
||||
|
||||
Hi
Its good to be back, thanks to everyone that worked to get the site going again. I will need to fix my photos up that are hosted on Photobucket A lots been happening with my bug. I had the car back on the road for a few days and bent a rod, my fault, I got a bit carried away and drove it through a missfire. So its a fully forged strocker motor, 2.5 crank, Argo rods, Manley pistons etc 2142cc it made 305 kW on 29 psi, Tomei cams are now responding to tuning thanks to a new ECU, it also made 200kW at just 4,500 rpm, the torque is amazing. I also fitted an Accusump and Radium fuel rails and dampener. Ive loaded a dyno photo, not sire if it will work, Red blue green 3 boost settings. Pink is old setup Steve
__________________
STI powered 1303 in the works. |
#322
|
||||
|
||||
PS, photo loaded OK so I will load some more and update old posts
__________________
STI powered 1303 in the works. |
#323
|
||||
|
||||
A few extra photos, Accusump
__________________
STI powered 1303 in the works. |
#324
|
||||
|
||||
Radium fuel rails and fuel dampener
__________________
STI powered 1303 in the works. |
#325
|
||||
|
||||
Hi
After my Beetle crashed into my sons Beetle we did an update on it, Aero kit the same as mine, he borrowed my wheels for a while. Were building Oxy boxer for it, 82x94, Street elims, 48 IDFs dry sump etc
__________________
STI powered 1303 in the works. |
#326
|
||||
|
||||
Nice car for sure!
Steve, what is the benefit of a fuel damper? |
#327
|
|||
|
|||
Two amazing looking cars! Love the idea of the oxyboxer. Unfortunately for me, I can't install an oxy for the same reason I can't do a Suby mill...don't have the guts to cut up my car. Maybe if I could just find the right radiator set up.....
__________________
johnL (aka H2OSB) '74 1303, Outlaw sedan (with a GL flavor) |
#328
|
||||
|
||||
Hi
I needed a fuel pulse dampener because Im running ID 2000 injectors and when they open & shut they cause a chatter in fuel line which causes a rough idle. http://www.radiumauto.com/Fuel-Pulse...Kits-P751.aspx John, the idea of going Oxyboxer is that will be essentially an air cooled motor, a WBX with no water jackets. When I sold my 1302 and fitted an air cooled motor in place of the WBX all I had to do was fit a new spare wheel well to get it back to standard. Steve
__________________
STI powered 1303 in the works. |
#329
|
|||
|
|||
Quote:
Anyway, both you and CaveDarter have nice rides! H2OSB
__________________
johnL (aka H2OSB) '74 1303, Outlaw sedan (with a GL flavor) |
#330
|
||||
|
||||
tnx! learned somethink again :-)
You run E85 now (because of the 2000cc injectors)? |
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
|
|