#1
|
|||
|
|||
Porsche 911 style dash for 1303? (in the US)
does any one make a porsche style dash here in the states?
|
#2
|
||||
|
||||
If I get my hands on one I'll make them.
|
#3
|
|||
|
|||
carbon fiber would be cool, but only if its not to expensive (over 250) :P
hey Joe, can you make a sheet of carbon fiber thats thin enough to cut with a utility knife(1mm or .5mm?) On my Audi 4000 i want to make some accents around the guage cluster. |
#4
|
||||
|
||||
Yes, the thinnest sheet I can make is about .58mm (.0228) just let me know the size you need ? X ? and I'll let you know the cost.
|
#5
|
|||
|
|||
well i need two sheets that are (4 1/8" by 4 1/8").
i have ordered a sheet from you before. Thanks! Jonathan |
#6
|
|||
|
|||
???
|
#7
|
||||
|
||||
Jonathan,
It's $25.00 with shipping for the two 4 1/8" by 4 1/8 sheets. |
#8
|
|||
|
|||
can this be cut with a utility knife?
|
#9
|
||||
|
||||
Well it can be trimmed with tin snips or a good pair of scissors, but if you want to cut holes or windows in them then no. You would need a dremel with a diamond wheel, even though it's thin (.023) it's still very very tuff stuff.
Last edited by Carbon Joe; May 4th 2003 at 11:03. |
#10
|
|||
|
|||
bummer, i was thinking of using a Olfa circle cutter that uses a sharp exacto like blade. so i guess i might hold off on using CF for material.
|
#11
|
||||
|
||||
911 dash
A few years back I saw a company that built a early 911 dash for a 1303 I looked back through my links but can't find anything... I would love a 911 style dash out of Carbon...
__________________
Vincent W. Strader 64 Type I and 73 1303 going GL top to bottom now if i could just decide wich one. 04 Mitsubishi Lancer plans power 13b Turbo Rotary 300 hp Wheels 18" turbo twists inside Sparco blue racing seats Sparco pedels, wheel, and shifter nob Sparco Rep Andrew @ www.pilotracegear.com Good deals on Sparco stuff |
#12
|
|||
|
|||
Yeah, a carbon one would be slick! also expensive i would think
|
#13
|
||||
|
||||
A masterpiece
|
#14
|
||||
|
||||
where did you get that pic?
I saw a company a few years ago that made an early 911 style dash for the 1303... have not been able to find them online any more. It would be cool to have it with the key on the left like the 911 also.
__________________
Vincent W. Strader 64 Type I and 73 1303 going GL top to bottom now if i could just decide wich one. 04 Mitsubishi Lancer plans power 13b Turbo Rotary 300 hp Wheels 18" turbo twists inside Sparco blue racing seats Sparco pedels, wheel, and shifter nob Sparco Rep Andrew @ www.pilotracegear.com Good deals on Sparco stuff |
#15
|
||||
|
||||
Hoffmann in Germany sells them too and Remmele makes them in Carbon Fibre.
Alex |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|