Spare wheel for Porsche hubs

MattKab · #1 January 29th 2005, 16:01

Today I tried my newly aquired spare wheel. A fifth 17" wheel will not fit in any Beetle so this is the wheel to clear stock wings (fenders) and Brembo's and is lost in the well. The rim is 5.5*15et30mm from a 944S2, tyre is a Vredestien 165 self collapsing type.

Matt

Steve C · #2 January 30th 2005, 04:42

Hi

That’s better than having a valuable 17-inch spare in the boot, hope you never need to use it but if you do and the wheel you take off will not fit in the boot have plastic garbage bag so that the passengers can nurse it without getting dirty.

Steve

Pillow · #3 January 30th 2005, 21:14

Good choice Matt!

Those are for some reason pretty pricey wheels from what I have seen on e-bay... I gave up and just got a 16x6 C2 Design 90 for a spare as it was fairly cheap.

MattKab · #4 January 31st 2005, 14:35

Thanks,

You mention pricey on ebay.. Last summer I got ripped off £60 by a bogus ebayer, Ebay were most unhelpfull. The same wheel was in a few bogus auctions.

I paid £60 for this one too, but I hope I don't need it. It's good to have a spare, It will be 3 years in March/April that my 17's have been on!

Matt

Pillow · #5 February 1st 2005, 00:35

I would say for 3 years with no spare you are doing great!

Some of those people on e-bay are pure scum. Makes it a pain for normal people to use the auctions to buy/sell effectively. Luckily I have not had any issue yet (knock on wood).

Take Care,

KaferChris · #6 February 9th 2005, 21:32

I bought one of those alloy 15x5.5 spares...they don't fit correctly with BJ CB drop spindles.

The 17" spares that look similar are the ticket...but my pockets aren't that deep.

Chris Percival · #7 February 11th 2005, 05:03

Kinky Mick has a few:

http://www.kinkymickshappywheelshack.com/index.html

I shall be going down this route also.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)