#1
|
|||
|
|||
1303 75' 2387 efi
Hello all
as my engine is at last ready, and as my 1303 will be a germanlook, I thought I should share here some info, some pictures and videos for now from the engine, just received it from JPmotrosport and some videos http://www.youtube.com/watch?v=nOR7H...layer_embedded http://www.youtube.com/watch?v=UtzR1...layer_embedded The car still needs a lot of work but I think that the engine is already a good motivation to start with, cheers for now Friendly Dimitrios |
#2
|
||||
|
||||
Beautiful motor!
Jason
__________________
If I could just get paid for my sleepless nights.... 1960 VW Bug UBRDUB Walkaround 1st Drag Run Dyno Run Oval Ragster-'57 Rag/'04 Boxster S |
#3
|
||||
|
||||
Very nice engine. Are those Nickies? Looks like you are set up for drag racing.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe |
#4
|
|||
|
|||
Hello
thanks Jason, NO_H2O yes they are nickies from LN engineering, well the car will see some black races but not drag strips, I have other for the strip, so this one will be primarily a street car. Some spec as it's not seen, don't have older photos, sorry scat 86mm flanged crank, forged version not billet version carrillo 5,7" rods Je pistons nickies and arp's JPmotorsport MS230heads, inlet manifolds, roller throttle bodies and 5stud ratio rockers, the power comes from the heads out of the box, no porting no secrets, juts cutting the valve seats and that's all 48X38 cbperformance titanium valves schubeck ceramic lifters JPmotorsport aluminum tappered pushrods engle cam -was unlucky to this one as two months after my engine was assembled Johannes released his raptor series camshafts, probably I would have some more power with one of these Friendly Dimitrios |
#5
|
||||
|
||||
orsum looking motor and some amazing numbers on the dyno, cant wait to see the car.
__________________
my race car build galleryhttp://www.flickr.com/photos/1406263...7602662665607/ my web site www.rnjmotorsport.co.uk |
#6
|
|||
|
|||
nice looking set up.....
|
#7
|
||||
|
||||
Yeah, that is very hard-core Dimitrios! You must be one of very few that run the F1 oval roller throttle bodies.
Can you show us the car as well pretty please??? |
#8
|
|||
|
|||
Hello
thanks for the kind words, Wally I'll search for some decent looking ones or I will make some newer, as you understand I couldn't afford all together, now that the engine is done I can arrange to start working on the car -well in about a month from now as we're entering vacation period- anyway I'll post pics in the first instance Friendly Dimitrios |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|