DORIGTT - 'D ORIGinal TT

[DORIGTT]

Hey effvee,

I would imagine the Porsche 993 would be capable of rather high cold oil pressures that would be similar, if not greater than our 4 pot engines can produce. That being said, here are some photos I just took of the cooler for you with a tape measure for scale.

Let me know if you need anything else.

First photo - width of the core / unit
Second photo, thickness of the core
Third photo - overall height of the core
Fourth photo - overall width including mounting tabs
Fifth photo - total height of the cooler

[effvee]

Wonderful, thank you.

[ian godfrey]

i was looking at these bump stops, available in different heights and different compressions:
https://superpro.com.au/tradeview/in...&SDID=99000313
i thought I could drill and tap the depression in the arm and screw it in with loctite.

[Steve C]

Hi

This is what I did for a bump stop

[DORIGTT]

Thanks Steve!

[Steve C]

Nice. Is that a Prototipo?

[DORIGTT]

Yes Steve, it is. I'd been searching for one at a reasonable price, and when I found it I had no idea it would take 2.5 months to get!!!

[Steve C]

I've been looking on https://mrsteeringwheel.com/ but $ is so poor at the moment I will have to wait

[Clatter]

Great looking build. looking forward to seeing more progress..