![]() |
#1
|
||||
|
||||
Anyone using a CAE shifter ?
I bought a CAE shifter years ago and now am getting ready to install it. I have no instructions and the only one I have seen on line shows the center tunnel cut down and made flat for the install. If you have done it please post some pictures.
Thanks
__________________
Meyers Manx Signature #85 , 79 Convert |
#2
|
|||
|
|||
Hello
you don't have to cut anything, just take off all the existing tarboards of the pan to sit directly on the sheetmetal. BUT I show you what I made as I felt it makes it sit more rigid so all of the movement goes on shifting and not twisting the shifter ![]() ![]() ![]() ![]() ![]() The shifter in the pictures is actually set the other way -the night hours are tough!- but anyway you get the point, hope it helps a little Oh I forgot you'll have to shorten the hand brake if you have any as it messes with the shifter Friendly Dimitrios |
#3
|
||||
|
||||
Thank you Dimitrios! I will build that set up, looks easy enough. What is the body kit on that lower beetle? You need to show us pictures.
__________________
Meyers Manx Signature #85 , 79 Convert |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|