#1
|
||||
|
||||
MY new brakes.
I know you have all seen them...... but here you go anyways.
|
#2
|
|||
|
|||
Nick brakes! Wish I could afford 951 stuff.
What is the aluminum box opposite the master cylinder? - proportioning valve? - line lock? |
#3
|
|||
|
|||
What model of line lock is that?
and what master cyl ? My 61 looks similar but mine has all early 944 brakes with 944 master cyl. |
#4
|
||||
|
||||
Hurst lock, csp 21mm master cylinder.
|
#5
|
|||
|
|||
Excuse me if this is a dumb question, but are your lines run the right way out of your master cyl? I thought the front line goes out the first hole and rear is the second hole (from the pedal)? I know it's not the same in all M/C's. Thanks JR
|
#6
|
||||
|
||||
your excused.
|
#7
|
|||
|
|||
hey ar'nt we all here to learn discuss and sometimes teach....and not be excused... not just show off our new brakes.....:bowdown:
|
#8
|
||||
|
||||
Didnt mean it like "that" It was a good question... got me thinking a little bit. Almost scared me there for a few minutes.....
PS. I thank everyone on the forum for sharing all thier info on this swap. It saved me alot of time with trial and error. Last edited by 64bug; June 5th 2006 at 10:02. |
#9
|
||||
|
||||
Have you remembered the brake light switch?
Rich
__________________
http://www.ricola.co.uk |
#10
|
||||
|
||||
Ya its on the line loc.
|
#11
|
||||
|
||||
Well, heres what i came up with. Fitting these on drop spindles is a real PITA. But there on there. I was hard cutting into the nice pretty calipers. Thank you to all who have shared info.on doing this conversion. It helped greatly.
|
#12
|
||||
|
||||
|
#13
|
||||
|
||||
THANKS AGAIN! |
#14
|
|||
|
|||
Sweet mother of Moses!
__________________
~Dave ______ '55 Ragtop Needs: TLC |
#15
|
||||
|
||||
very nice
wish I had them
__________________
74 Std. GL 08 Vw rabbit 18 WR250R 07 Chevy 3500 Dually |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|