#1
|
|||
|
|||
What else should I do?
I'm just about to put the short block together, from my 74'Westy.
It's a stock balanced 2.0 polished block and dished pistons with a #86 Webcam and a 30mm shadek pump. I have tall dual intakes and 36 DRLA Dell's. The local Machine shop said they may have 914 heads for me with 42x36 valves. Is this going to be too much for my engine? Is there anything i'm forgetting before I bolt it together? Mahalo's Sean |
#2
|
||||
|
||||
Hi,
Definitely get the 914 2,0 ltr heads unless they are cracked. Your 86 cam will love it. Less restriction in the exhaust ports should give lower head temps as well. Walter |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|