#1
|
||||
|
||||
944 n/a vs 4 pot brakes on an '03
if 944 spindles, disks, hubs calipers etc were fitted to a 1303 could 4 pot calipers be fitted later on as a bolt on?
What I'm really asking is whether the bolt spacing and "offset" of the 4 pots is the same as the single piston ones?? same at the rear... thanks
__________________
Subaru powered oval/1303 hybrid project |
#2
|
|||
|
|||
i was just thinking about that!!!
i also have the system of 944 bolt on my 03 because the big reds where to expensive for me. Now i'm saving for some money because i do want the big reds because they are very brutal. i've searched the internet and this is what i found. first i begin with the easie part IMO, thats te rear, if you mount 924s with the vented disks, that should be a bolt on your 944 and for the front i think this should be the same, the spindles and hubs look the same of the 924s and 944. i don't know if it's correct because i didn't measure things, i only saw pictures and know how my system looks i have the same questions, but a question of mine is, does somebody with big reds or anather S setup have some info about: the sizes of disks the width of the disk (from bolting to the other end of the disk the mounting screw distance of the callipers thanks and greetz RON (hollandbugpower) |
#3
|
|||
|
|||
by the way look at these two sites
then you can see that IMO the use 944 stuf http://franklinsvwwerks.com/new-product3.htm http://www.mbt-engineering.de/ gr ron |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|