|
|
#1
September 24th 2006, 12:53
|
||||
|
||||
|
Searched before post - 17" X 9" on short/short swing axle
...already read the post about 17/18" on early cars....
Do you think this would work well and look right? Car - 1966 Beetle Front Narrowed 2" Beam -2" wider than stock CCC fenders - CB Drop spindles/disk Rear - Short/Short swing axle - 1.25" wider than stock CCC fenders - CB RotoHubs/disk Wheels off a a 993 Front 7JX17 et55 Rear 9JX17 et55 Thoughts?
__________________
Scott Webster, Houston TX 1979 1303 Convertible, 1966 GL Sedan Last edited by scottwebster; September 24th 2006 at 14:59. 
|
|
#3
September 28th 2006, 21:45
|
||||
|
||||
|
__________________
Scott Webster, Houston TX 1979 1303 Convertible, 1966 GL Sedan
|
|
#4
September 29th 2006, 00:48
|
||||
|
||||
|
The front you shouldn't need wider fenders. With proper spacer anyways.
Those brake dont widen your track in the rear either, so you'll need some pretty big spacers to get the rears to work. like 30mm....  or go with like et23mm offset wheels to push them out.
|
|
#5
September 29th 2006, 10:22
|
||||
|
||||
|
I already have the fenders, and painted. FYI - they look awesome!
__________________
Scott Webster, Houston TX 1979 1303 Convertible, 1966 GL Sedan
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
