2270cc kit?

ShApE · #1 July 22nd 2003, 23:42

ok so since no-one answered my last thread i decided to trick u and it worked. so any information on raby's 2270cc kit? is it hard to install. price range? any info appreciated!

Vincent · #2 July 22nd 2003, 23:55

looks like no one knows...

ShApE · #3 July 22nd 2003, 23:59

dayum....

jrinlv · #4 July 23rd 2003, 00:28

Do you have any parts for cores? 5-6 k is what I would plan on spending, If you really need to know drop Jake a line.... Thats what I would do if I wanted an engine from him (he would know best) My 2 JR

Rob · #5 July 23rd 2003, 07:38

I think there was a tread about this at the shoptalkforums....migth want to check it out...

Rob.

ShApE · #6 July 23rd 2003, 12:15

alright thanks

Ron Roberts · #7 July 23rd 2003, 18:03

Jake is on vacation.
The kits cost about a grand less than if it is assembled I believe. Thats not much considering that the turn key version is dyno tuned. and the kit is not. Jake doesn't throw a bunch of parts in a bag and call it a kit. The kit is basically assembled and taken apart again so he knows it fits, properly clearanced and all that. I'm suprised he doesn't charge more than the turn key considering he has to disassemble it for you.

Ron

ShApE · #8 July 23rd 2003, 22:51

alright i have a new question : i was wondering will whats the highest i can go on here without having to do any machining to the case. i know it says 88mm and larger requires machining but is that still true on a type 4? click here.

vujade · #9 July 24th 2003, 00:06

well a 2.0 t4 case had 94's, so that is already larger then 88's.

You should be able to use 96's no problem I believe.

ShApE · #10 July 24th 2003, 00:08

mines not the 2.0

i got it out of a 72-73 bus so i think 1.7 or 1.8

#11 July 24th 2003, 02:11

ShApE, as per your request via private message I am posting a reply to this topic...

I have no knowledge nor interest in the aircooled motor(s). Personally my car has a Golf GTI motor and although I own a Superbug I am more of a "watercooled guy" per say.

vujade · #12 July 24th 2003, 07:20

shape, what is the engine code on the case?
I can tell you the engine size if you give me the letters that are in front of the numbers.

You should be able to find these next to the crankcase breather tower

ShApE · #13 July 24th 2003, 10:36

the letters are CB

vujade · #14 July 24th 2003, 10:50

CB is a 1.7 Bus motor.

It has 90mm pistons stock

ShApE · #15 July 24th 2003, 10:53

so what do u think is the largest i could go without machining?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)