#1
|
|||
|
|||
New custom hubs cheap :)
I found finnish good quality manufacturer who makes hubs as cheap as 200 euros per pair. Usually they are at 250-300 euro range, if using 6082 T6 material.
They dont have vw beetle hub cad drawing but i have and can design a custom hubs and hats. So no need anymore old 944 hubs which need bearing adapters http://www.tommisbillet.com/suomi/au..._frameset.html For example: Nissan 200 SX S13 front hubs, 100 euros each. Last edited by -Alex-; May 4th 2012 at 16:34. |
#2
|
||||
|
||||
Alex,
Do you have any more information on this? Have you already provided them with the CAD drawing? Thanks, Bob |
#3
|
|||
|
|||
I also have complete cad drawings of hubs for use on the standard spindles on 1302/1303s... fully customiziable of course.... right now im working on a couple of different full kits for converting to BIG brakes much cheaper than the big companys will do.... will probably offer in different PCD´s first we are looking to finish 4x100, 5x112 and 5x120
__________________
1303s -73 project 2.1 Wbx turbo and LOTS of special parts designed and manufactured in house |
#4
|
|||
|
|||
Very interested if you can do some for beam-axle bugs?
__________________
1969 German Looker in progress: 1776 turbo EFI motor (eventually!) Built IRS Box 944 Turbo Brembos (Fr) 964 C2 Brembos (Rr) |
#5
|
||||
|
||||
I'm interested for my beam axle Karmann Ghia in 5x130.
What type of track increase are we looking at, or can you have them made with standard or any track within reason? Kevin |
#6
|
|||
|
|||
Hubs can be made at any offset, so there is no track increase, if you dont want any.
Here are mine hubs and hats: |
#7
|
||||
|
||||
What did the package cost you?
|
#8
|
|||
|
|||
These came from porsche racing parts manufacturing company that gave me a document that makes these legal in my country, these all six parts did cost 1200 euros.
But the other company, makes these parts also at half of the price, but they could not give me similar document. Hubs at this company are 200-300 € / pair. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|