Sick of Freezing feet

[Bugger]

I haven't liked how the rear heater flaps and the defroster flaps are connected to one lever for quite some time now, so I devised an awesome fix. I made another lever to control the rear flaps. It works awesome, I will get some pics, in case some of you have the same problem, and don't want to get rid of the control for the rear in case you have people in the back seat.

[BeetleWarrior]

Yea, I'd like to see some pics on that.
Been thinking about running a tube under the front seats to blow out to the front to warm my feet.

[rust eez]

Me too

[Lazarus]

you could always get one of these

[al_kaholik]

I really don't see the problem... If your heating system is up to scratch there isn't an issue.

Honestly I've never been so warm as I get in the beetle ('77 standard) Demisting is still an issue but heated screens and a fresh air blower box would tackle that better.

LH lever down and RH up and its like an inferno.

[volky68]

What kind of heater is that Lazarus? Gas???

[owdlvr]

That's a gas-heater, Eberspacher BN2.

-Dave

[Lazarus]

Originally Posted by owdlvr

That's a gas-heater, Eberspacher BN2.

-Dave

ding! ding! ding! tell em what he's won johnny.

[owdlvr]

Originally Posted by Lazarus

ding! ding! ding! tell em what he's won johnny.

Can I win a fuel pump for my BN2?



-Dave

[Joel]

are you in the US bugger?

i've seen how the 73? onwards bugs there have all footwell heater outlets connected to one lever

all the ones here just have the left lever controls the rear outlets and front ones can just be opened or closed manually
shut them all for windscreen defrost

works well

[Lazarus]

Originally Posted by owdlvr

Can I win a fuel pump for my BN2?



-Dave

you may want to give these guys a try they are up your way. check page 3 they have them used for $65
http://www.germansupply.com/home/cus...me.php?cat=376

[owdlvr]

Thanks for the link...unfortunately they're out of stock on the one that I need.

I suppose I should start watching the samba

-Dave

[owdlvr]

Hey Laz,

Pulling this thread out from the dead almost a year later. What did you use for your outlet piping and exhaust piping?

-Dave

[Lazarus]

if you are talking about for hot air in the cabin i used 300 degree brake ducting. there are ton of places to get it on the internet. every where from ebay to race sites.the pic has the inlet from the cabin as a abs plastic hose, i have since replaced it as well. more for looks than anything. the stock works great it just dont look cool enough for me. if you are talking about for the combustion chamber i used the stock header that came with the system for exhaust and i went to a vacuum cleaner junk yard and got the fresh air hose. i think that particular hose came from a Stanley steamer carpet shampooer

[owdlvr]

Thanks! That's exactly what I was looking for.

-Dave