#1
|
|||
|
|||
964 front set up
Hi Folks,
Has anyone made a set up using all 964 gear- rotors and calipers? Or even just 964 calipers with another rotor? Would it fit under a 15" wheel? Thanks in advance, James |
#2
|
|||
|
|||
hello, due to my searcing and probing
-i think i understand that the 964 had 3 different diamter discs -298 by 28 305 by 32 and 322 by 32 -all i have bought is the top one -55 quid, its total height -face to disc edge is 80mm -i am hoping the bigger ones share this offset -ps it all depends on what 15 inch wheels i have personally fitted a e34 bmw disc at 299 to an early hub, by machining it -106.4 and drilling, and with spacers fitted it to a type 2 spindle -it then ran a 996 rear caliper -i didn't then know that the 986/boxster fronts were the same size, but use bigger pistons |
#3
|
|||
|
|||
-there you go, was used with a new bay -ie 2002 bay window, king and link spindle -same as late bay caliper holes -early 944 hub -spacers e34 bmw discs are 299 by 26 -996 rear caliper with an easy peasy adaptor -ie 1.1/4 steel with 4 holes in any hoots -it all works, plus it fit a 15 inch fuch, and the steelie -53 et and the other ones the 911 ones -i am sure the 964 disc, due to its 80mm offset will go in a 15 inch wheel -maybe |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|