![]() |
#1
|
|||
|
|||
brembos on my square
I have started adding a brembo brake upgrade on my squareback. 944 front hubs,993 front and rear rotors and brembo calipers from a 944t
I started the front as soon as I am done there will be moving to the back and doing a irs conversion and adding the alum arms from a 944, hubs machined ![]() ![]() ![]() bearing adapter and sleeve using vw inner and 944 outer ![]() vw race installed ![]() vw inner bearing and 944 outer bearing ![]() test fitting hubs and rotors ![]() test fitting calipers to see what i need to made for a adapter to mount them ![]() ![]() ![]() used the mounting tab off of a set of 944 spindles just welded them to the stock vw spindles ![]() ![]() ![]() Last edited by kombi211; February 10th 2010 at 21:42. |
#2
|
|||
|
|||
front is done now on to the rear
![]() ![]() ![]() |
#3
|
||||
|
||||
Looks great! How's the fit, any rubbing?
|
#4
|
|||
|
|||
Thanks everything fits nicely. the only rubbing i have is if i crank the wheels hard they tend to rub on the inner fender. but its not that bad. going to try spacing the wheels out a little more and see if that helps
|
#5
|
||||
|
||||
Great idea welding the 944 caliper mounts to the stock spindles. Looks great!
__________________
1972 1300 GL In Progress ![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|